English
Filter

Accessories

Accessories for modulog modules

Mechanical accessories
Base plates | Adaptor plates | Flange plates | Table plates with one or two modulog interfaces

Electrical accessories
Supply units | Hand panels and foot switches | Operating panels | Mains cables | Extension cables | Battery modules | Command module

Series Data sheet Technical data
M8.100
M8.100
show
M8.100 Base plates

 

for modulog lifting modules

with single and double interface 200 x 200
material: steel, black oxide

M8.110
M8.110
show
M8.110 Adaptor plates

 

for modulog interfaces

for vertical mounting of the rotating module - horizontal axis DMH
material: steel, black oxide

M8.120
M8.120
show
M8.120 Flange plates

 

for modulog rotating modules

individual design for fixing of component parts
material: steel, black oxide

M8.130
M8.130
show
M8.130 Table plates with a modulog interface

 

with or without handles

steel or wooden table plates
max. centric load 2000 .. 6000 N

M8.131
M8.131
show
M8.131 Table plates with two modulog interfaces

wooden table plates
with and without reinforcing plates
max. plane load 3,000 .. 4,000 N

M8.200
M8.200
show
M8.200 Control Modules

 

for modulog modules

  • control module for 1 modulog module
  • control modules for 2, 3 or 4 modulog modules with synchronization control
  • for power supply and control with one operating element
  • with or without memory function
M8.201
M8.201
 
show
M8.201 Power Supply for Mobile Systems

 

Control module with battery holder for modulog modules

  • power grid-independent power supply with rechargeable battery
    - supply voltage: 24 VDC
    - capacity: 4,5 Ah
  • control module with battery holder
  • quick battery charger
M8.203
M8.203
show
M8.203 Electrical operating elements, lines and connectors

 

for modulog modules

  • hand panel with up/down-function
  • hand panel with memeory-function
  • foot switch with up/down-function
  • mains cables
  • plugs
  • extension lines
RHI M-018
RHI M-018
show
modulog command module

 

operating panel with touch panel, two-hand operation and lifting module

operating panel with touch panel
storage and work plate
two-hand operation
lifting module Basic with base plate

show
figure 1: base plate 500 x 500 mm






 
show
figure 2: adaptor plate DMH-140









 
show
figure 3: flange plate


 
show
figure 4: steel table plate with 2 handles













 
show
figure 5: wooden table plate with steel strengthening





 
show
figure 6: supply unit for 1 modulog module



 
show
figure 7: rechargeable battery, control module with battery holder and quick battery charger









 
show
figure 8: Hand panel with up/down function
 
show
figure 9: hand panel with memory function
 
show
figure 10: foot switch







 
show
figure 11: modulog command module
 

Base plates
for modulog lifting modules
Base plates are primarily used with lifting modules. They are screwed to the lifting module and the floor to get a larger support surface and an increased stability of the lifting module. The use of base plates is especially recommended for uneven sub-floors and high moment loads.

Versions
● Base plate 500 x 500 mm (figure 1)
with single interface 200 x 200
● Base plate 600 x 250 mm
with single interface 200 x 200
● Base plate 750 x 500 mm
with single and double interface 200 x 200

Adaptor plates M8.110
for modulog interfaces

Versions
Adaptor plates DMH-140 (figure 2)
The adaptor plate DMH-140 allows vertical mounting of the rotating module - horizontal axis DMH on modules with a modulog interface 140 x 140.

Adaptor plate 140 – 200
By means of the adaptor plate 140 – 200 modules with a 140 x 140 mm modulog interface can be mounted onto a 200 x 200 mm modulog interface. For example a rotating module - vertical axis on a cart or floor module.

Adaptor plate 200 – 140
By means of the adaptor plate 200 –140 modules with a 200 x 200 mm modulog interface can be mounted onto a 140 x 140 mm modulog interface. For example a lifting module on a rotating module - vertical axis.

Flange plate M8.120 (figure 3)
for modulog rotating modules
The flange plate can be used instead of the modulog flange plate of the rotating modules - horizontal axis DMH and rotating modules - vertical axis DMV. Compared with the modulog flange plate, this plate does not have an 140 x 140 modulog interface. This plate offers the possibility to design individual fixing for component parts. Specific drilling patterns or other provisions for the location of component parts or fixtures can be provided by the user.
The flange plate can be easily exchanged against the modulog flange plate.

Table plate with a modulog interface M8.130

Versions

Steel table plate with 2 handles – 600 x 600 mm (figure 4)
Materials:
Table plate: stainless steel, bright surface
Handles: steel profile, welded, black-lacquered

Wooden table plate with 2 handles – 600 x 600 mm
Materials:
Table plate: Multiplex beech, 50 mm, surface clear coated
Handles: anodized aluminium

Wooden table plate with steel strengthening, without handles – 900 x 850 mm
Materials:
Table plate: Multiplex beech, 50 mm
Reinforcing plate: steel lacquered

Table plate with two modulog interfaces M8.131

Versions

Wooden table plate with steel strengthening – 1750 x 850 mm (figure 5)
with reinforcing plates

Wooden table plate – 2000 x 800 mm
without reinforcing plates
Materials:
Table plate: Multiplex beech, 50 mm
clear coated
Reinforcing plate: steel lacquered

Control modules M8.200
with or without memory function

The control module is used for power supply and control of one modulog lifting module with one operating element (as per data sheet M8.203).
The memory function allows to store up to five height positions of the lifting module. These can be recalled again and again or newly stored.

Versions
for 1 modulog module with or without memory function (figure 6)
for 2, 3 or 4 modulog modules with or without memory function

Energy supply for mobile systems M8.201 (figure 7)
Control module with battery holder for modulog modules

Application
The individual components are used for power supply for mobile systems in industrial assembly. They are suitable for electro-mechanical lifting modules or linear actuators with 24 VDC.

Description
A system with different individual components allows a network-independent power supply for electrical lifting modules. A rechargeable battery supplies the drive unit with energy. The battery can be recharged by an external quick battery charger.

Electrical Operating Elements, Lines and Connectors M8.203

Hand panel with up/down function (figure 8)
The hand panel has two buttons which operate the functions "up" and "down". When releasing a push-button the connected module stops immediately.

 

 

 

Hand panel with memory function (figure 9)
The operating panel is equipped with two push-buttons to adjust the lifting units and four push-buttons for the memory function.

 

 

Foot switch (figure 10)
The foot switch is equipped with two push-buttons for the functions "up" and "down". When releasing a push-button the connected module stops immediately.

Mains cable - smooth
nominal voltage: 230 VAC
length: 3 m

Cable socket for self-assembly control ports and power supply

Extension cable
for the connection of the lifting module to the control or from the hand panel or foot switch to the control.
nominal voltage: 24 VDC
length: 5, 8 or 10 m

modulog command module RHI-M018 (figure 11)
Operating panel with touch panel, two-hand operation and lifting module

The modulog command module allows central operation of several modules from the modulog and modupress modular system.
Press, lifting, rotating and tilting modules can be controlled individually or together and thus allow automatic assembly processes, which can be stored and retrieved as required.

 
show
figure 1: lifting module Shop-Floor with base plate
 
show
figure 2: rotating module - horizontal axis DMH 200 vertically mounted on a lifting module Twin-Strong
 
show
figure 3: rotating module - vertical axis DMV 1000 with flange plate Ø 170
 
show
figure 4: wooden table plate – mounted on the lifting module Shop-Floor and cart module WMS
 
show
figure 5: Height-adjustable working table with table plate 1750 x 850 m
 

"ROEMHELD modulog" Assembly and handling technology

Application example Base plate (figure 1)
Lifting module Shop-Floor with base plate

 

 

 

 

 

 

Application example Adaptor plate (figure 2)
Rotating module - horizontal axis DMH 200 vertically mounted on a lifting module Twin-Strong

 

 

 

 

Application example Adaptor plate (figure 3)
Rotating module - vertical axis DMV 1000 with flange plate Ø 170

 

 

 

 

Application example Table plates with a modulog interface (figure 4)
Wooden table plate – mounted on the lifting module Shop-Floor and cart module WMS

 

 

 

Application example Table plates with two modulog interfaces (figure 5)
Height-adjustable working table composed by the table plate 1750 x 850 m, two electrically-operated lifting modules Shop-Floor with supply unit and the floor module FMD 800.