English
Filter

Rotating modules

Rotating modules with horizontal or vertical axis of rotation

 

manually or electrically-operated

with/without indexing

max. load: 2000/6000 N
max. torque: 800 Nm
angle of rotation: 360°

Series Data sheet Technical data
M1.101
M1.101
show
M1.101 Rotating module – horizontal axis DMH 200

 

Max. load 2,000 N

manual operation

max. load: 2000 N
max. torque, axial: 800 Nm
max. torque, radial: 800 Nm
angle of rotation: 360°
operations: manual or hand lever
operation indexing: hand or foot lever

M1.201
M1.201
show
M1.201 Rotating module – DMHe 200 / DMVe 600 electrical operation

 

max. tilting moment 800 Nm

max. torque 120 Nm

Rotating module – horizontal axis: DMHe 200
max. load:  2.000 N

Rotating module – vertical: DMVe 600
max. load:  6.000 N

max. tilting torque: 800 Nm
max. torque: 120 Nm
holding torque: 350 Nm
angle of rotation: 360°
rotation: any
index: 90° standard (optionally 45° / 60° / 180°)
supply voltage: 24 .. 30 VDC

M1.301
M1.301
show
M1.301 Rotating module – vertical axis DMV 600

 

Max. load 6,000 N

manual operation

max. load: 6000 N
max. torque, axial: 800 Nm
max. torque, radial: 800 Nm
angle of rotation: 360°
operations: manual
operation indexing: foot pedal

show
figure 1: rotating module – horizontal axis DMH 200 - version without indexing - manual operation



















 
show
figure 2: rotating module – horizontal axis DMH 200 - automatic indexing - operation with hand lever
 
show
figure 3: rotating module – horizontal axis DMH 200 - actively-operated indexing - operation with hand lever
 
show
figure 4: rotating module – horizontal axis DMH 200 - indexing with foot pedal - manual op
 
show
figure 5: rotating module - horizontal axis DMHe 200 - electrically-operated
 
show
figure 6: rotating module - vertical axis DMVe 600
 
show
figure 7: rotating module – vertical axis DMV 600 - version without indexing
 
show
figure 8: rotating module – vertical axis DMV 600 - version with indexing
 

M1.101 Rotating module – horizontal axis DMH 200

Description
The rotating module - horizontal axis DMH is a double supported rotation axis that can compensate high axial and radial forces. The angle of rotation in both directions is 360°. Due to special bearings it is insensitive to shocks and thrusts.
The design of the rotating module allows its integration in applications with light as well as with heavy loads.
When using the rotating module in assembly processes, workpieces can be rotated rationally, quickly and safely and can be assembled ergonomically from all sides. The rotating module is equipped with an optional indexing.

Operation
The basic version of the rotating modules does not have any operating elements. The rotating operation is manually effected at the workpiece or at the assembly fixture. Alternatively, versions with hand lever are available.
The indexing is operated by a hand lever of the rotating module or a separate hand lever or foot pedal.

Versions

Version without indexing - manual operation (figure 1)
The rotating module - horizontal axis DMH 200 does not have an indexing in its basic version. The rotating operation is manually effected at the workpiece or at the assembly fixture.

Automatic indexing - operation with hand lever (figure 2)
Rotating as well as indexing are ergonomically operated by one hand lever only.
To rotate the workpiece the hand lever is operated in any direction. Every 90° indexing of the position is made automatically. Engagement and disengagement of the indexing is also effected automatically.

 

 

 

 

Actively-operated indexing - operation with hand lever (figure 3)
Rotating as well as indexing are ergonomically operated by one hand lever only.
To unlock the indexing position the hand lever has to be tilted in axial direction by approx. 10° to get connected by form fit with the rotating module.

 

 

 

 

Indexing with foot pedal - manual operation (figure 4)
It consists of a basic module with integrated indexing mechanism and an operating unit with foot pedal, connected by a 2 m long hydraulic hose. This flexible connection allows the individual placement of the operating unit at the most favourable ergonomic position.
The rotating operation is manually effected at the workpiece or at the assembly fixture.

 

 

 

M1.201 Rotating module - horizontal axis DMHe 200 - electrically-operated (figure 5)
M1.201 Rotating module - vertical axis DMVe 600 - electrically operated (figure 6)

When using the rotating module, component parts can be rotated rationally, quickly and safely and can be assembled ergonomically from all sides. The strongly reduced worm gear allows high holding torques in standstill. The double-bearing drive shaft compensates high axial and radial forces.
The rotating module is designed for a long service life. The electronically commutated DC motor is virtually wear-free. The mechanical components and sealing elements are designed for 1,000,000 indexing cycles within the indicated load limits.

 

 

 

 

M1.301 Rotating module – vertical axis DMV 600 - manual operation (figure 7/8)

Description
The rotating module - horizontal axis DMV is a plain bearing rotation axis that can compensate high axial and radial forces. The angle of rotation in both directions is 360°.
Due to special bearings it is insensitive to shocks and thrusts.
The design of the rotating module allows its integration in applications with light as well as with heavy loads.
When using the rotating module in assembly processes, workpieces can be rotated rationally, quickly and safely and can be assembled ergonomically from all sides. The rotating module is equipped with an optional indexing.

Operation
The basic version of the rotating modules does not have any operating elements. The rotating operation is manually effected at the workpiece or at the assembly fixture.
The indexing is operated by a foot pedal.

 
show
figure 1: adaptor plate
 
show
figure 2: flange plate, round
 
show
figure 3: hand panel
 
show
figure 4: foot switch
 

Accessory for manually operated rotating module DMH 200

Adaptor plate (figure1)
for vertical mounting of the rotating module
as per data sheet M8.110

 

Accessory for manually operated rotating modules

Flange plate, round (figure 2)
for individual fixing holes
as per data sheet M8.120

 

 

 

Accessories for electrical rotating modules
• switching power supply
• hand panel with connecting cable 1.6 m (figure 3)
• foot switch with connecting cable 3.0 m (figure 4)
as per data sheet M 8.203

 
show
figure 1: rotating module DMH 200, with adaptor plate vertically mounted on a lifting module.
 

"ROEMHELD modulog" Assembly and handling technology

Application example 1 (figure 1)
Rotating module DMH 200, with adaptor plate vertically mounted on a lifting module.