Filter
Product range

Pipeline elements

Fittings, precision steel pipes, pipe clamps,

hydraulic high-pressure hoses, plug connections, pressure gauges, hydraulic oil

fittings: ø6 ..ø16 mm, G1/8 .. G 1/2
hydraulic pipes: ø8 ..ø15 mm
hydraulic hoses: ND4 .. 6.3
max. operating pressure:250 .. 500 bar

Series Data sheet Technical data
F9.300
F9.300
show
F9.300 Fittings with 24° cone as per DIN EN ISO 8434-1

 

Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges

fittings: ø6 ..ø16 mm, G1/8 .. G 1/2
hydraulic pipes: ø8 ..ø15 mm
hydraulic oil: HLP22..46, Oemeta HF-Du
pressure gauges: 0-40..600 bar
plug-in connectors: ND5
max. operating pressure:250 .. 500 bar

F9.361
F9.361
show
F9.361 Hydraulic high-pressure hoses

 

assembled ready for connection

max. operating pressure 250/500 bar

nominal diameter: ND4 .. ND6.3
port size: 8L / 8S
union nut: m8L / m8S
preferred lengths: 500 .. 2500 mm

show
figure 1: hydraulic high-pressure hoses F9.361








 
show
figure 2: hose structure
 
show
figure 3: hose connection
 

Hydraulic high-pressure hoses F9.361 (figure 1)

Application
High-pressure hoses are used for energy and signal transmission in hydraulic systems.Especially when connecting movable elements, but also for the connection of hydraulic subassemblies which are not fixed on a common base, e.g. power units and clamping fixtures.

Hose structure (figure 2)
Depending on operating pressure and nominal diameter, high-pressure hoses consist of one or several layers of wire or textile mesh or spiral inlays.
1: Inner tube
2: Inlay
3: Cover
4: Hose wall
5: Insulation layer

Hose connection (figure 3)
After pressing of the hose fittings at both ends the high-pressure hose is ready for connection.
1: Hose
2: Nipple
3: Holder
4: Union nut
5: Hose fitting

Service life / installation instructions
The application time including storage time should not exceed 6 years, the net storage time 2 years.High temperatures, frequent motion cycles or high pulse frequencies can reduce the application time.

Maintenance
Before putting into operation and then at least once a year, the high-pressure hoses have to be checked by an expert if they are still leak-proof.

Marking hose
on the hose there is the following marking:

  • name or code of the manufacturer
  • number of European standard
  • type
  • nominal diameter
  • quarter and the last two figures of the year of manufacture


Marking fitting
on the fitting there is the following marking:

  • name or code of the manufacturer
  • month of manufacture
  • the last two figures of the year of manufacture
  • nominal pressure PN of the hose fitting
  • part number of the complete hydraulic hose

 

Important notes!
We deliver only completely pressed high-pressure hoses with mounted union nut.Pipe sockets with removable cutting ring and union nut are no longer allowed.

 
show
figure 1: plug-in connectors for plates and piping strips
 

Application example 1 (figure 1)
Plug-in connectors for plates and piping strips