Accessories
Mechanical accessories | Electrical accessories
Base plates | Adaptor plates | Flange plates | Table plates with one or two modulog interfaces
Supply units | Hand panels and foot switches | Operating panels | Mains cables | Extension cables | Battery modules | Command module
Series (10)
-
-
-
for 1 modulog module with code letter E – supply voltage: 230 VAC, 50 Hz – operating voltage: 24 VDC – code class IP66 – connections: plug-in connector – as per data sheet M8.200 -
for 1 modulog lifting module – with incremental stroke measuring system – operating voltage (battery): 25.2 VDC – code class IP30 – connections: plug-in connector – as per data sheet M8.200 -
for 1 modulog lifting module – with memory function – with incremental stroke measuring system – operating voltage (battery): 25.2 VDC – code class IP30 – connections: plug-in connector – as per data sheet M8.200
-
-
-
for 1 modulog module with code letter B or I – supply voltage: 230 VAC, 50 Hz – operating voltage: 24 VDC – code class IP66 – connections: plug-in connector – as per data sheet M8.200
-
for 2 modules with synchronization control – with code letter G – supply voltage: 230 VAC, 50 Hz – operating voltage: 24 VDC – code class IP66 – connections: plug-in connector – as per data sheet M8.200
-
for 2 modulog lifting modules – with incremental stroke measuring system – operating voltage (battery): 25.2 VDC – code class IP30 – connections: plug-in connector – as per data sheet M8.201
Base plates
for modulog lifting modules
Base plates are primarily used with lifting modules. They are screwed to the lifting module and the floor to get a larger support surface and an increased stability of the lifting module. The use of base plates is especially recommended for uneven sub-floors and high moment loads.
Versions
● Base plate 500 x 500 mm
with single interface 200 x 200
● Base plate 600 x 250 mm
with single interface 200 x 200
● Base plate 750 x 500 mm
with single and double interface 200 x 200
base plate 500 x 500 mm
Adaptor plates M8.110
for modulog interfaces
Versions
Adaptor plates DMH-140
The adaptor plate DMH-140 allows vertical mounting of the rotating module - horizontal axis DMH on modules with a modulog interface 140 x 140.
Adaptor plate 140 – 200
By means of the adaptor plate 140 – 200 modules with a 140 x 140 mm modulog interface can be mounted onto a 200 x 200 mm modulog interface. For example a rotating module - vertical axis on a cart or floor module.
Adaptor plate 200 – 140
By means of the adaptor plate 200 –140 modules with a 200 x 200 mm modulog interface can be mounted onto a 140 x 140 mm modulog interface. For example a lifting module on a rotating module - vertical axis.
adaptor plate DMH-140
Flange plate M8.120
for modulog rotating modules
The flange plate can be used instead of the modulog flange plate of the rotating modules - horizontal axis DMH and rotating modules - vertical axis DMV. Compared with the modulog flange plate, this plate does not have an 140 x 140 modulog interface. This plate offers the possibility to design individual fixing for component parts. Specific drilling patterns or other provisions for the location of component parts or fixtures can be provided by the user.
The flange plate can be easily exchanged against the modulog flange plate.
flange plate
Table plate with a modulog interface M8.130
Versions
Steel table plate with 2 handles – 600 x 600 mm (figure 4)
Materials:
Table plate: stainless steel, bright surface
Handles: steel profile, welded, black-lacquered
Wooden table plate with 2 handles – 600 x 600 mm
Materials:
Table plate: Multiplex beech, 50 mm, surface clear coated
Handles: anodized aluminium
Wooden table plate with steel strengthening, without handles – 900 x 850 mm
Materials:
Table plate: Multiplex beech, 50 mm
Reinforcing plate: steel lacquered
steel table plate with 2 handles
Table plate with two modulog interfaces M8.131
Versions
Wooden table plate with steel strengthening – 1750 x 850 mm (figure 5)
with reinforcing plates
Wooden table plate – 2000 x 800 mm
without reinforcing plates
Materials:
Table plate: Multiplex beech, 50 mm
clear coated
Reinforcing plate: steel lacquered
wooden table plate with steel strengthening
Control modules M8.200
with or without memory function
The control module is used for power supply and control of one modulog lifting module with one operating element (as per data sheet M8.203).
The memory function allows to store up to five height positions of the lifting module. These can be recalled again and again or newly stored.
Versions
● for 1 modulog module with or without memory function
● for 2, 3 or 4 modulog modules with or without memory function
supply unit for 1 modulog module
Energy supply for mobile systems M8.201
Control module with battery holder for modulog modules
Application
The individual components are used for power supply for mobile systems in industrial assembly. They are suitable for electro-mechanical lifting modules or linear actuators with 24 VDC.
Description
A system with different individual components allows a network-independent power supply for electrical lifting modules. A rechargeable battery supplies the drive unit with energy. The battery can be recharged by an external quick battery charger.
rechargeable battery, control module with battery holder and quick battery charger
Electrical Operating Elements, Lines and Connectors M8.203
Hand panel with up/down function
The hand panel has two buttons which operate the functions "up" and "down". When releasing a push-button the connected module stops immediately.
Hand panel with up/down function
Hand panel with memory function
The operating panel is equipped with two push-buttons to adjust the lifting units and four push-buttons for the memory function.
hand panel with memory function
Foot switch
The foot switch is equipped with two push-buttons for the functions "up" and "down". When releasing a push-button the connected module stops immediately.
foot switch
Mains cable - smooth
nominal voltage: 230 VAC
length: 3 m
Cable socket for self-assembly control ports and power supply
Extension cable
for the connection of the lifting module to the control or from the hand panel or foot switch to the control.
nominal voltage: 24 VDC
length: 5, 8 or 10 m
Modulog command module RHI-M018
Operating panel with touch panel, two-hand operation and lifting module
The modulog command module allows central operation of several modules from the modulog and modupress modular system.
Press, lifting, rotating and tilting modules can be controlled individually or together and thus allow automatic assembly processes, which can be stored and retrieved as required.
modulog command module
Application examples
"ROEMHELD modulog" Assembly and handling technology
Application example Base plate
Lifting module Shop-Floor with base plate
lifting module Shop-Floor with base plate
Application example Adaptor plate
Rotating module - horizontal axis DMH 200 vertically mounted on a lifting module Twin-Strong
rotating module - horizontal axis DMH 200 vertically mounted on a lifting module Twin-Strong
Application example Adaptor plate
Rotating module - vertical axis DMV 1000 with flange plate Ø 170
rotating module - vertical axis DMV 1000 with flange plate Ø 170
Application example Table plates with a modulog interface
Wooden table plate – mounted on the lifting module Shop-Floor and cart module WMS
wooden table plate – mounted on the lifting module Shop-Floor and cart module WMS
Application example Table plates with two modulog interfaces
Height-adjustable working table composed by the table plate 1750 x 850 m, two electrically-operated lifting modules Shop-Floor with supply unit and the floor module FMD 800.
Height-adjustable working table with table plate 1750 x 850 m
