single acting with spring return
The clamping bar is mounted on the press bed or ram using a spacer bar.
single acting with spring return
with press-in or built-in pistons
clamping force up to 48 kN, piston stroke 6 or 8 mm
The clamping bar is mounted on the press bed or ram using a spacer bar.
Clamping is carried out on the die clamping edge by applying hydraulic pressure to the 5 pistons which are arranged side by side with a pressure medium and mechanical unclamping by a spring return.
Hydraulic oil is supplied through G 1/4 ports provided on both sides.
Flat design with tool insertion slopes.
Clamping force up to 35 kN uniformly distributed over 5 pistons.
When using several clamping bars in a row, the elements are interconnected by means of hoses or pipes.
single acting with spring return
with built-in pistons
clamping force up to 116 kN, piston stroke 8 mm
The clamping bar is mounted on the press bed or ram using a spacer bar.
Clamping is carried out on the die clamping edge by applying hydraulic pressure to the 2. 3 or 6 pistons which are arranged side by side with a pressure medium and mechanical unclamping by a spring return.
Hydraulic oil is supplied through G 1/4 ports provided on both sides.
Flat design with tool insertion slopes.
When using several clamping bars in a row, the elements are interconnected by means of hoses or pipes.
double acting , with built-in pistons
clamping force up to 116 kN, piston stroke 8 mm
The clamping bar is directly screwed on the press bed or ram using a spacer bar. Clamping is carried out on the die clamping edge by applying hydraulic pressure to the port of the 2, 3 or 6 pistons which are arranged side by side with a pressure medium.
Unclamping is made by pressurising the port B. Hydraulic oil is supplied through G 1/4 ports provided on both sides.
Flat design with die inlet chamfer.
Application example 1
Clamping bars 2.2095 installed in press bed and ram. Easy loading of dies using die change consoles and lateral guide rollers.
Application example 2
Clamping bars 2.2096 - retrofit of a double-column press. Tool insertion facilitated by chamfered spacer bars and roller bars.