double acting
Double-acting pull clamping element for clamping dies on a press bed or press ram.
The die must be provided with T-slots for the tie rod. The die must be inserted in the correct position and in parallel with the clamping elements.
Monitoring of the clamping and unclamping position by inductive proximity switches. Tie rod and piston are hardened and ground. The hydraulic system is protected against dirt by wiper rings.
Applications
Special features
The pull-clamping element with T-slot facilitates a die standardisation by means of T-slot bars or T-nuts on the die.
The hydraulic oil supply is made either through drilled holes in the bed and the ram or through pipes.
Tie rod and piston are hardened and ground.
The hydraulic system is protected against dirt by wiper rings.
Applications
Special features
Pull clamping elements integrated in press bed of a double-column press. Feeding of dies by roller bars inserted in the T-slots of the press bed.
Clamping of a complete die changing table with pull clamping elements.
Pull clamping elements with T-slot installed in a press bed.
Die clamping in a press.
Ram: clamping of the upper die using double T-slot bars
Bed: clamping of the lower die using firmly mounted T-slot bars