Accessories

Mechanical accessories | Electrical accessories

Base plates | Adaptor plates | Flange plates | Table plates with one or two modulog interfaces
Supply units | Hand panels and foot switches | Operating panels | Mains cables | Extension cables | Battery modules | Command module

Series  (9)

Items  (45)

  1. for self-assembly control ports – as per data sheet M8.203
  2. for self-assembly power supply – as per data sheet M8.203
  3. para 1 módulo de elevación – polycarbonato, IP66 – según hoja M8.200
  4. for 1 modulog lifting module – with incremental stroke measuring system – operating voltage (battery): 25.2 VDC – code class IP30 – connections: plug-in connector – as per data sheet M8.201
  5. for 1 modulog lifting module – with memory function – with incremental stroke measuring system – operating voltage (battery): 25.2 VDC – code class IP30 – connections: plug-in connector – as per data sheet M8.201
  6. para 1 mód.elev.,func.memo – polycarbonato, IP66 – según hoja M8.200
  7. para 2 módulos de elevación – polycarbonato, IP66 – según hoja M8.200
  8. for 2 modulog lifting modules – with incremental stroke measuring system – operating voltage (battery): 25.2 VDC – code class IP30 – connections: plug-in connector – as per data sheet M8.201
Página:
  1. Anterior
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5

Description

Base plates

for modulog lifting modules
Base plates are primarily used with lifting modules. They are screwed to the lifting module and the floor to get a larger support surface and an increased stability of the lifting module. The use of base plates is especially recommended for uneven sub-floors and high moment loads.


Versions
● Base plate 500 x 500 mm 
with single interface 200 x 200
● Base plate 600 x 250 mm
with single interface 200 x 200
● Base plate 750 x 500 mm
with single and double interface 200 x 200

base plate 500 x 500 mm

Adaptor plates M8.110

for modulog interfaces

 

Versions

Adaptor plates DMH-140 
The adaptor plate DMH-140 allows vertical mounting of the rotating module - horizontal axis DMH on modules with a modulog interface 140 x 140.


Adaptor plate 140 – 200
By means of the adaptor plate 140 – 200 modules with a 140 x 140 mm modulog interface can be mounted onto a 200 x 200 mm modulog interface. For example a rotating module - vertical axis on a cart or floor module.


Adaptor plate 200 – 140
By means of the adaptor plate 200 –140 modules with a 200 x 200 mm modulog interface can be mounted onto a 140 x 140 mm modulog interface. For example a lifting module on a rotating module - vertical axis.

adaptor plate DMH-140

Flange plate M8.120

for modulog rotating modules
The flange plate can be used instead of the modulog flange plate of the rotating modules - horizontal axis DMH and rotating modules - vertical axis DMV. Compared with the modulog flange plate, this plate does not have an 140 x 140 modulog interface. This plate offers the possibility to design individual fixing for component parts. Specific drilling patterns or other provisions for the location of component parts or fixtures can be provided by the user.
The flange plate can be easily exchanged against the modulog flange plate.

flange plate

Table plate with a modulog interface M8.130

Versions


Steel table plate with 2 handles – 600 x 600 mm (figure 4)
Materials:
Table plate: stainless steel, bright surface
Handles: steel profile, welded, black-lacquered


Wooden table plate with 2 handles – 600 x 600 mm
Materials:
Table plate: Multiplex beech, 50 mm, surface clear coated
Handles: anodized aluminium


Wooden table plate with steel strengthening, without handles – 900 x 850 mm
Materials:
Table plate: Multiplex beech, 50 mm
Reinforcing plate: steel lacquered

steel table plate with 2 handles

Table plate with two modulog interfaces M8.131

Versions


Wooden table plate with steel strengthening – 1750 x 850 mm (figure 5)
with reinforcing plates


Wooden table plate – 2000 x 800 mm
without reinforcing plates
Materials: 
Table plate: Multiplex beech, 50 mm
clear coated
Reinforcing plate: steel lacquered

wooden table plate with steel strengthening

Control modules M8.200

with or without memory function

 

The control module is used for power supply and control of one modulog lifting module with one operating element (as per data sheet M8.203).
The memory function allows to store up to five height positions of the lifting module. These can be recalled again and again or newly stored.


Versions
 for 1 modulog module with or without memory function
● for 2, 3 or 4 modulog modules with or without memory function

supply unit for 1 modulog module

Energy supply for mobile systems M8.201

Control module with battery holder for modulog modules


Application
The individual components are used for power supply for mobile systems in industrial assembly. They are suitable for electro-mechanical lifting modules or linear actuators with 24 VDC.


Description
A system with different individual components allows a network-independent power supply for electrical lifting modules. A rechargeable battery supplies the drive unit with energy. The battery can be recharged by an external quick battery charger.

rechargeable battery, control module with battery holder and quick battery charger

Electrical Operating Elements, Lines and Connectors M8.203

Hand panel with up/down function 
The hand panel has two buttons which operate the functions "up" and "down". When releasing a push-button the connected module stops immediately.

Hand panel with up/down function

Hand panel with memory function

The operating panel is equipped with two push-buttons to adjust the lifting units and four push-buttons for the memory function.

hand panel with memory function

Foot switch

The foot switch is equipped with two push-buttons for the functions "up" and "down". When releasing a push-button the connected module stops immediately.

foot switch

Mains cable - smooth

nominal voltage: 230 VAC
length: 3 m


Cable socket for self-assembly control ports and power supply


Extension cable
for the connection of the lifting module to the control or from the hand panel or foot switch to the control.
nominal voltage: 24 VDC
length: 5, 8 or 10 m

Modulog command module RHI-M018

Operating panel with touch panel, two-hand operation and lifting module

The modulog command module allows central operation of several modules from the modulog and modupress modular system.
Press, lifting, rotating and tilting modules can be controlled individually or together and thus allow automatic assembly processes, which can be stored and retrieved as required.

modulog command module

Application examples

"ROEMHELD modulog" Assembly and handling technology

Application example Base plate

Lifting module Shop-Floor with base plate

lifting module Shop-Floor with base plate

Application example Adaptor plate

Rotating module - horizontal axis DMH 200 vertically mounted on a lifting module Twin-Strong

rotating module - horizontal axis DMH 200 vertically mounted on a lifting module Twin-Strong

Application example Adaptor plate

Rotating module - vertical axis DMV 1000 with flange plate Ø 170

rotating module - vertical axis DMV 1000 with flange plate Ø 170

Application example Table plates with a modulog interface

Wooden table plate – mounted on the lifting module Shop-Floor and cart module WMS

wooden table plate – mounted on the lifting module Shop-Floor and cart module WMS

Application example Table plates with two modulog interfaces

Height-adjustable working table composed by the table plate 1750 x 850 m, two electrically-operated lifting modules Shop-Floor with supply unit and the floor module FMD 800.

Height-adjustable working table with table plate 1750 x 850 m

PDF Data sheets