Lifting modules

Lifting columns to lift heavy loads

manual-hydraulic version - operation with foot pedal
electro-mechanical versions - operation with foot switch or hand panel

Series  (8)

Items  (180)

  1. 4 off buffer, Ø50 x 30 mm long – 4 off socket head cap screw, M10 x 16 mm – maximum load per set: 600 kg – only subject to compressive load – as per data sheet M4.005
  2. 1000 N, con pedal – – según hoja M4.101
  3. 1000 N, con pedal – – según hoja M4.101
  4. 1000 N, con pedal – – según hoja M4.101
  5. 1000 N, con pedal – – según hoja M4.101
  6. 1000 N, con pedal – – según hoja M4.101
  7. electro-mechanical version – with integrated stroke end disconnection – (not suitable for synchronization control) – control voltage 24 VDC – with coiled connecting cable 1.5 m – operation with foot switch or hand panel – max. lifting force 4000 N – max. bending torque 2000 Nm – max. stroke 200 mm – as per data sheet M4.501
  8. electro-mechanical version – with incremental stroke measuring system – (suitable for synchronization control) – control voltage 24 VDC – with smooth connecting cable 2.5 m – operation with foot switch or hand panel – max. lifting force 4000 N – max. bending torque 2000 Nm – max. stroke 200 mm – as per data sheet M4.501
  9. manual-hydraulic version – operation with foot pedal – max. lifting force 4000 N – max. bending torque 2000 Nm – max. stroke 200 mm – as per data sheet M4.501
  10. electro-mechanical version – with incremental stroke measuring system – (suitable for memory function) – control voltage 24 VDC – with smooth connecting cable 2.5 m – operation with foot switch or hand panel – max. lifting force 4000 N – max. bending torque 2000 Nm – max. stroke 200 mm – as per data sheet M4.501
Página:
  1. Anterior
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. ...
  8. 18

Description

Lifting modules

Manual-hydraulic versions - operation with foot pedal 
The stroke movement is obtained by a hydro-mechanical lifting jack with single-lever actuation, with oil being pumped by means of a piston pump into a plunger cylinder. For lowering the oil returns by the weight of the load from the cylinder back to the reservoir. A defined speed reduction is effected, independent of the load.


Electro-mechanical versions - operation with foot switch or hand panel
The lifting motion is generated by an electric motor with a spindle lifting gear. Lifting and lowering is triggered by push-buttons with touch control contact. After release of the push-button, the motion will be immediately stopped.
The electrically operated variant is particularly suitable for positioning and adjusting tasks of working tables as well as for material supply and transport. They excel by a smooth running.

Lifting module Basic M4.101

manual-hydraulic version
Lifting module for ergonomic design of working places.
The lifting units are ideal for height adjustment of tables, demonstration objects and similar equipments as well as for medical treatment equipments.

lifting module Basic M4.101

Lifting module Shop-Floor Telescope M4.202

Telescopic lifting module for workshop applications in the industry.


Manual-hydraulic version 


Electro-mechanical version 

lifting module Shop-Floor Telescope M4.202 - manual hydraulic version
lifting module Shop-Floor Telescope M4.202 - electro-mechanical version

Lifting module Range M4.203

Double telescopic lifting module for workshop applications in the industry.


Electro-mechanical version 

lifting module Range M4.203 - electro-mechanical version

Lifting module Shop-Floor M4.301

Lifting module for workshop and assembly applications in the industry.


Manual-hydraulic version 


Electro-mechanical version 
Up to 4 lifting modules Shop-Floor M4.301 can be operated with synchronization control by a corresponding supply unit.
For example complete lifting platforms can be designed.

lifting module Shop-Floor M4.301 - manual-hydraulic version
lifting module Shop-Floor M4.301 - electro-mechanical version

Lifting module Strong M4.401

Lifting modules for high demands in the industrial assembly.
The lifting module Strong has a high-tensile cylinder tube profile with chromium-plated surfaces. The high precision of the tube profile enables a guiding system without clearance and perfect smooth running. The guiding profile is protected against rotary motion by a key connection with minimum clearance. The guiding system works without fat and oil lubrication. High-quality materials for plain bearings are used. 
Characteristic are applications with indifferent, dynamically swelling rotating motions and shock motions.


Manual-hydraulic version 


Electro-mechanical version 

lifting module Strong M4.401 - manual-hydraulic version
lifting module Strong M4.401 - electro-mechanical version

Lifting module Solid M4.402

Manual-hydraulic version 
The lifting module has an integrated roller guiding element. This allows a backlash-free guiding system with very good smooth running and the introduction of high moments into the lifting module.
The guiding system is lifetime lubricated. To obtain high robustness, all components are made of high-quality materials. Characteristic are applications with indifferent, dynamically swelling rotating motions and shock motions.

lifting module Solid M4.402 - manual-hydraulic version

Lifting module Strong M4.501

Lifting module for extreme loads.
The lifting module Twin-Strong has two high-tensile cylinder tube profiles with chromium-plated surfaces. The design with solid profiles allows a stable guiding system with perfect smooth running. The high precision of the profiles permits a guiding system without clearance and perfect smooth running. The guiding system works without fat and oil lubrication. High-quality materials for plain bearings are used.
Characteristic are applications with indifferent, dynamically swelling rotating motions and shock motions.


Manual-hydraulic version 


Electro-mechanical version 

lifting module Twin-Strong M4.501 - manual-hydraulic version
lifting module Twin-Strong M4.501 - electro-mechanical version

Application examples

"ROEMHELD modulog" Assembly and handling technology

Application example 1

Lifting module Shop-Floor with hand panel and mounted rotating module horizontal axis DMH with hand lever

lifting module Shop-Floor with hand panel and mounted rotating module horizontal axis DMH with hand lever

Application example 2

Cart module WMS with mounted lifting module Shop-Floor and table plate

cart module WMS with mounted lifting module Shop-Floor and table plate

Application example 3

workbench 2000 x 800 mm
with electrically-operated height adjustment with hand panel

 
workbench 2000 x 800 mm with electrically-operated height adjustment with hand panel

PDF Data sheets

PDF

Lifting module Basic max. lifting force 1,000 N – stroke from 200 to 600 mm – manual-hydraulic version

hoja del catálogo M4.101
PDF

Lifting module Shop-Floor Telescope max. lifting force 1,000 / 2,000 N – stroke from 300 to 1,000 mm – manual-hydraulic and electro-mechanical version

hoja del catálogo M4.202
PDF

Lifting module Range max. lifting force 2,000 N – stroke from 440 to 940 mm – electro-mechanical telescopic version

hoja del catálogo M4.203
PDF

Lifting module Shop-Floor max. lifting force 1,000 - 6,000 N – stroke from 200 to 600 mm – manual-hydraulic and electro-mechanical version

hoja del catálogo M4.301
PDF

Lifting module Strong max. lifting force 6,000 N – stroke from 200 to 400 mm – manual-hydraulic and electro-mechanical version

hoja del catálogo M4.401
PDF

Lifting Module Solid max. lifting force 4,000 and 6,000 N – stroke from 200 to 400 mm – manual-hydraulic version

hoja del catálogo M4.402
PDF

Lifting module Twin-Strong max. lifting force 4,000 and 6,000 N – stroke from 200 to 400 mm – manual-hydraulic and electro-mechanical version

hoja del catálogo M4.501