manually or electrically-operated
with/without indexing
Description
The rotating module - horizontal axis DMH is a double supported rotation axis that can compensate high axial and radial forces. The angle of rotation in both directions is 360°. Due to special bearings it is insensitive to shocks and thrusts.
The design of the rotating module allows its integration in applications with light as well as with heavy loads.
When using the rotating module in assembly processes, workpieces can be rotated rationally, quickly and safely and can be assembled ergonomically from all sides. The rotating module is equipped with an optional indexing.
Operation
The basic version of the rotating modules does not have any operating elements. The rotating operation is manually effected at the workpiece or at the assembly fixture. Alternatively, versions with hand lever are available.
The indexing is operated by a hand lever of the rotating module or a separate hand lever or foot pedal.
Version without indexing - manual operation
The rotating module - horizontal axis DMH 200 does not have an indexing in its basic version. The rotating operation is manually effected at the workpiece or at the assembly fixture.
Rotating as well as indexing are ergonomically operated by one hand lever only.
To rotate the workpiece the hand lever is operated in any direction. Every 90° indexing of the position is made automatically. Engagement and disengagement of the indexing is also effected automatically.
Rotating as well as indexing are ergonomically operated by one hand lever only.
To unlock the indexing position the hand lever has to be tilted in axial direction by approx. 10° to get connected by form fit with the rotating module.
It consists of a basic module with integrated indexing mechanism and an operating unit with foot pedal, connected by a 2 m long hydraulic hose. This flexible connection allows the individual placement of the operating unit at the most favourable ergonomic position.
The rotating operation is manually effected at the workpiece or at the assembly fixture.
When using the rotating module, component parts can be rotated rationally, quickly and safely and can be assembled ergonomically from all sides. The strongly reduced worm gear allows high holding torques in standstill. The double-bearing drive shaft compensates high axial and radial forces.
The rotating module is designed for a long service life. The electronically commutated DC motor is virtually wear-free. The mechanical components and sealing elements are designed for 1,000,000 indexing cycles within the indicated load limits.
Description
The rotating module - horizontal axis DMV is a plain bearing rotation axis that can compensate high axial and radial forces. The angle of rotation in both directions is 360°.
Due to special bearings it is insensitive to shocks and thrusts.
The design of the rotating module allows its integration in applications with light as well as with heavy loads.
When using the rotating module in assembly processes, workpieces can be rotated rationally, quickly and safely and can be assembled ergonomically from all sides. The rotating module is equipped with an optional indexing.
Operation
The basic version of the rotating modules does not have any operating elements. The rotating operation is manually effected at the workpiece or at the assembly fixture.
The indexing is operated by a foot pedal.
Rotating module DMH 200, with adaptor plate vertically mounted on a lifting module.